DDNG485 Network Gateway
Flexible network communications gateway for DyNet RS-485 networks
The Philips Dynalite DDNG485 is a flexible network communications bridge designed for RS-485 networks. The two opto-isolated RS-485 ports enable the DDNG485 to implement a trunk and spur topology on large project sites, with the bridge providing a high-speed backbone opto-coupled to many lower speed spurs.
Electrical fault isolation – Faults can be isolated to individual network spurs.
Route DyNet to third-party systems – Such as audio-visual and building automation systems, providing an integrated approach to total building control and energy management.
DMX512 mode – Transmit or receive up to 64 channels of DMX512, with automatic DyNet conversion and task triggering. Provides temporary control of house lights from the DMX512 console in an auditorium scenario.
Internal controls – Including programmable logic controller capable of assembly and transmission of userdefined data strings.
Flexible mounting solution – DIN-rail mountable, designed to be installed into a distribution board or other electrical enclosure.
95 mm x 105 mm x 75 mm (3.8” x 4.1” x 2.9”)
12NC – 913703081209
No Fields Found.