DMC810GL Multipurpose Controller
Combining leading edge and signal dimming control
The DMC810GL is an 8 channel device that provides a combination of control technologies. The ability to control mixed load types from one device provides savings in initial capital costs, installation costs and a reduction in ongoing maintenance.
Four channels for control of dimmable loads – Leading edge phase control for use with incandescent, neon, leading edge electronic and iron core transformers.
Four signal control outputs – Selectable to 1-10 VDC, DSI and DALI broadcast for control of HF drivers.
Four switched outputs – Signal control outputs can operate in tandem with, or separately from, switched outputs.
Interference suppression – Iron powder core toroidal choke lessens effects of interference from other equipment, such as transformers.
Naturally ventilated – Requires no forced cooling or maintenance.
Diagnostic functionality – Device Online/Offline status reporting.
User controls – Incorporates service override switch – all channels to 100% and a diagnostic LED.
Options available – Including an additional RS485 DyNet/DMX512 port or earth leakage and overload protection on each channel.
366 mm x 212 mm x 179 mm (14.4” x 8.3” x 7.1”)
Standard Product 12NC – 913703028009
Extra DyNet / DMX512 Port 12NC – 913703028709
Earth leakage and overload protection on each channel 12NC – 913703028509
Dual Port & RCBO 12NC – 913703028909
No Fields Found.